SP18 - Turquoise Green
SP18 - Turquoise Green
SP18 - Turquoise Green
SP18 - Turquoise Green
SP18 - Turquoise Green

SP18 - Turquoise Green

SKU: 20018-PT Brand: Seattle Pottery Supply    

Trustpilot

$15.00

SKU Wet or Dry INVENTORYORDER ELIGIBILITY PRICE
20018-PT Wet / 1 Pint 10 in stock While supplies last $15.00
20018-QT Wet / 1 Quart 12 in stock While supplies last $24.00
20018-1GAL Wet / 1 Gallon 4 in stock While supplies last $76.80
20018-5GAL Wet / 5 Gallon Out of Stock Please call $268.80
20018-1LB Dry / 1 Pound Bag 11 in stock While supplies last $6.95
20018-5LB Dry / 5 Pound Bag 6 in stock While supplies last $33.01
20018-10LB Dry / 10 Pound Bag 6 in stock While supplies last $62.55
20018-25LB Dry / 25 Pound Bag 1 in stock While supplies last $139.00
20018-50LB Dry / 50 Pound Bag Out of Stock Please call $229.35

*Back orders will be placed for order quantities exceeding that of on-hand inventory.

SP18 - Turquoise Green

For CONE 04 - 6

A lime green glaze with a turquoise green mottled surface.

Image: CONE 6


Glazes are designed to form a sealed glass layer when fired in order to make pottery watertight and food safe, even if the clay itself isn’t vitrified. A layer of minerals that is applied to clay in the bisqueware stage, it is also a great way to add color and sheen. Glazes range from transparent to completely opaque. Mid-range glazes, such as this, should be used on mid-range clay (meant to be fired to cone 6 - 4).

To apply: Brush or dip onto bisque-fired pottery (pottery that has been fired to cone 06 - 08). If brushing, apply three layers, alternating the direction of the brush strokes with each layer to create a smooth finish. Let dry completely between each coat— (until it completely loses its sheen). If dipping, dip and hold for three to five seconds, then remove from the glaze and shake off the excess. A second layer can be applied but 3 or more layers will result in the glaze running off the pot. Let dry completely between each coat. Fire to cone 4 - 6.

If the consistency seems thick, add water to thin it down. If too thin, leave the container open to let some of the moisture evaporate. Note that mixing glazes together or applying one on top of the other may cause the glazes to react differently than you expect. We recommend that you always test a new glaze combination to see how it performs.

For a more in-depth how-to, check out Pottery Glazing Techniques.

×

Out of Stock!

If you would like to place an order for this back-ordered item,
please call us at 888.915.1196

Thank you!

Close

QUESTIONS & ANSWERS

Ask a Question

  • I bought 10 pounds of dry, what is a good starting amount of water to start? Are your dry mixes good for both dipping and brushing?

    For each 5lbs of dry glaze, you want to use approximately 1 gallon of water. For 10lbs of dry glaze, 2 gallons should do the trick, but you should start with a little less than 2 gallons, and then add water until you have achieved the consistency you like. 

    Our dry mixes are designed to make dipping glazes, and do not contain the gums and additives that make brushing glazes brush on well. I would recommend just using our dry glazes as dipping glazes.

  • Does this contain zinc? PS it would be great if your online listings contained more info about the item (such as directions, content, etc.) thank you! Trying to see if this would play nice over an underglaze transfer I have.

    No, this glaze doesn't contain zinc. And we appreciate the feedback - we're working towards adding more information!