SP44 - Gold Rust

SP44 - Gold Rust

FIRING RANGE CONE 4 - 6

A bright yellow gold speckled glaze. SP44 Gold Rust produces dark red-bronze speckles that sit over an opaque surface. This glaze combines well with other glazes, creating some beautiful mottling effects.

Mid-range glazes, such as this, should be used on mid-range clay (meant to be fired to cone 4 - 6).

To apply: Always mix first before each use! Then brush or dip onto bisque-fired pottery (pottery that has been fired to cone 08 - 06).
If brushing, apply three layers, alternating the direction of the brush strokes with each layer to create a smooth finish. Let dry completely between each coat (until it completely loses its sheen), but do not over-dry or the glaze may crawl.

If dipping, dip and hold in the glaze, then remove from the glaze and shake off the excess. The amount of time you hold the piece in the glaze will dictate the thickness of the coat. We recommend 1 dip. A second layer can be applied, but more layers can result in the glaze running off the pot. Let dry until it loses its sheen between each coat if you are adding additional coats.

If the consistency seems thick, first mix thoroughly. If it still seems thick, add water SPARINGLY to thin it down. If too thin, leave the container open to let some of the moisture evaporate.

Note that mixing glazes together or applying one on top of the other may cause the glazes to react differently than you expect. We recommend that you always test a new glaze combination and clay/glaze combination to see how it performs.

For a more in-depth how-to, check out Pottery Glazing Techniques.